Stephan Meijer is Owner and director
of Stephan Meijer Architecture Ltd.
What makes a home Modern? Not necessary the location, but more the design style.
Modern home qualities could be described as sophisticated, elegant and stylish.
Architecture has evolved for centuries resulting in a very high quality design and
construction method that has passed the test of time.
The homes could be described as having the following qualities; clean lines, solid,
warm, comfortable, functional and timeless. Below I have listed 7 examples of great
This smart home is very transparent. This glass on the sunny side is frameless
floor to ceiling allowing uninterrupted views and solar gains. Parking garage
underneath in basement doing away with clutter on the ground floor. The exposed
concrete walls anchor the house down to the site.
This contemporary home is designed by Stephan Meijer Architect and is located
in Nelson New Zealand. The house is situated on a very steep slope and has 2
split levels to accommodate for the car garage access. This house is a great
example of a Modern style, passive solar home suitable for the Nelson Climate.
Typical details that define a Modern style house are: Internal gutters, Solid
construction, high specification in finish and very warm and comfortable.
This very sculptural house is located in Switzerland near Lake Geneva. It is designed
by SAOTA from Cape Town, South Africa. The sandstone and the dark steel form
a nice contrast. Parking in basement below. Landscaping is a big part of the design
of this house.
Like most modern houses, the colour of the house is mainly white. White is a
timeless color and reflects the mood of the surroundings so the color of the
house is always different. It also reflects the sunlight and the paint will be more
durable. This house is nicely built into a hill and has as most modern houses have,
windows from floor to ceiling and integrated balustrading to the balconies.
This is a very interesting looking German house. Almost a sculpture. I would love
to have a look inside this house. The use of blinds might be difficult, but the use
of modern glass can address issues like privacy and solar gain.
A typical modern house using exposed concrete blocks to provide an anchor for
the lighter white and glass elements of the house. Again floor to ceiling windows
and white stucco. The steel balcony and roof parapet complement the hous.
This house must be well insulated. Lots of modern homes have flat roofs and so
does this one. The windows are made of timber. Clean lines and simple forms
make this a great house.
For more information on modern passive solar homes:
Please download our free design guide:
This Modern luxury home is carefully crafted into the steep hillside overlooking Nelson Harbour.
Many home building companies use standard plans as a starting point for the design of new homes.
Houses are treated as commodities that are interchangeable and independent of location and users. I guess standard lot sizes and a flat section can give the impression that this is a valid process, but unfortunately this is not the case. Conditions will be very different on each site even if this may not look like it to the untrained eye. The biggest issue however is not even the site conditions, but the requirements of the people who are going to live in these houses. We are all from different backgrounds and have different priorities and desires.
To design a site appropriate house specially designed for each individual client, will not only enhance the living standards, but also reduce heating costs, increase comfort, express clients creativity, increase comfort, but will also increase the quality of each subdivision as a whole.
An argument to go for a standard house plans I hear often is that the client knows from the start how much the house is going to cost. This is hardly ever true. Any change in layout and materials usually incur hefty markups and lots of items are not included or of very basic standard. This lack of flexibility means that lots of compromises will have to be made resulting in a compromised end-result.
By the time the clients move in, the total building cost is often much higher compared to the price advertised.
So what is a better alternative? I have designed many houses for clients who have been to a homebuilder initially but were unable to find the plans they liked was unsuitable for their section due to slope, size or other matters.
The following simple steps will result in a great house exactly designed to the clients requirements.
Fill out a detailed brief so you are clear about what you want without anyone talking you into something.
Get a concept design done. This is a great start to your individual designed house. You get an good idea of the design options and pricing. A concept design is very affordable and provides you with high value plans and information.
develop the plans to a standard to be able to get a pricing done by a trusted builder and materials supplier.
Check pricing against budget. Adjust the design where needed and get building consent.
The whole process is really simple and efficient. Especially if you work with a selected builder. We work with some very competitive great builders in the area that will look after you. You will not be tied to one home building company but are free to choose the best one for your project..
Choosing a section for your new house is difficult enough, but choosing a sloping section can be a challenge. I have listed below the main issues to consider that will be helpful when choosing a hilly section.
The most important aspect of a hillside section is the slope. The steeper the slope, the more difficult it will be to build on and the more expensive. Building a concrete slab on the ground is cheaper below appr. 7 degrees slope. Above that, using a timber floor is cheaper.
cost comparison of a 8.7x17.4 meter slab.
A north facing would be prefered as you can build a house with good solar gain. Second best would be West facing. The afternoon sun is much warmer compared to the morning sun so you can still get good solar gain, but you will need good shading as in the summer your house might get overheated. Third best option would be East facing. Morning sun will be nice, but you will lose the sun early in the day. The worst option would be a South facing block esp. when the land is steep. A low sloped South facing lot may be OK, as you can still get some solar gains for most of the year. Another factor will be the views. The best sites have the best views towards the sun.
If you build on a slope you usually end up with a multi story house. Most people prefer to live on the top story because of better views. So from access point of view it is better park the car on the same level as the living areas. Which means it is better to have access from the top of the section. However from a cost perspective it would be cheaper to build the garage under the house, but you will have to walk upstairs every time you want to enter the house. You have to decide what is most important to you. Especially older people would prefer level access.(from the top) A split level home can be a great option as only half a flight of stairs will need to be taken.
As discussed at (1), building on a sloped site is more expensive compared to building on the flat. When you build a house on poles, you usually also have to build the outdoor areas on poles and the this will require balustrading, resulting in extra costs. If you prefer to retain the site and have a bottom story under the house, you will have to pay for retaining walls and engineering. These are usually expensive. Steep sections are usually cheaper to purchase and the steepness can be used as a bargaining tool. Building on a slope also take longer compared to flat land as the site access is more difficult. If the site is not too steep you may want to consider building a split level home. This can be cheaper as earthworks will be less compared to 2 full stories.
Geotechnical issues are the site conditions relating to site stability. Land in New Zealand can be unstable due to the nature of the land and the exposure to earthquakes.
Stormwater runoff can also be a big issue on slopes. Running water can undercut foundations or cause slips. So called "No building zones" can apply as they are unable to provide a safe foundation. These issues need to be looked at by a professional.
Every building site is subject to council planning rules. A restricting rule can be the “Daylight angle” rule. This rule can restrict you from building over a certain height without approval from the neighbours. This rule can force you to excavate the house into the ground. Other rules may apply like front yard. This rule restrict you how close you can build the garage to the front yard boundary. Private covenants can also be in place restricting your options. Easements may be present on site so its pays to check on the title before buying the section.
Car parking may have to be provided for a new house by council law. Providing these carparks can be expensive because you may have to build car decks or retain the land to provide flat car parking. This will add extra costs to your house. Usually you have to provide at least 2 car parking spots.
Not every site is so clear defined and there could be other issues not listed here.So it would be wise to involve an expert early on in the (pre)design process as mistakes can be very costly later. Feel free to contact me if you have any questions or comments. I am happy with any feedback or looking forward to helping you to find the right hillside section.
Stephan Meijer, Modern luxury architect
New Zealand is blessed with a moderate maritime climate. This means the temperature swings are modest compared to a land climate. You would think it is not too hard to design a house in NZ that is comfortable all year round without having to spend lots of money on heating and cooling?
Still most of the houses in New Zealand are either too hot in summer and/or too cold in winter due to a number of factors. The main ones being:
- Orientation of the house and glass openings.
- Poor insulation
- Thermal bridging of building elements. (eg. un insulated steel beams protruding to outside or no foundation perimeter insulation)
- Lack of thermal mass
- Air leakage from outside to inside
- Poor heating system
All these factors can be addressed during the design phase to create a house that uses Zero Energy for heating or cooling. SIP panels are a great product create a Zero energy house as they have a very high insulation value, prevent thermal bridging and are air tight ones in place for floors, walls and roofs.
Combined with the right placement of glass and orientation of the house, a SIP panel house will be very warm and comfortable.
The panels allow for great design freedom without structural restrictions relating to the house design. These houses perform really well in an earthquake and in high wind zones. Building a SIP panels house is not only faster, but does not cost more compared to a stick framed house. The choice is easy if you compare a SIP panel house with a traditional stick framed house.
Sip panels outperform traditional building methods on every aspect.
We, as sought after modern luxury architects, recommend the use of SIP panels for our passive solar eco homes to achieve the highest standard for comfort and quality as well as reducing the cost for heating.
Kind regards, Stephan Meijer, Modern luxury architect.
Welcome to our FREE resources!
We are happy to share our knowledge with you so you can start the process of building a new house. Below is a list of FREE, very helpful, information. Absolutely obligation free from us to you. Good luck!
Give away nr.1 ONE PAGE ACTION PLAN
This easy to follow guide will be very helpful you if you are thinking of building but are now quite sure.
By following the process you will find out:
• Do we need to build a new house?
• Where do I start?
• What is the process?
• What will it cost?
You will be able to make a better decision regarding your house plans. The biggest decisions are made early on in the process and have the biggest financial impact.
Give away nr.2:15 STEPS TO OBTAIN BUILDING CONSENT
This free guide will show you exactly how to obtain building consent in New Zealand. It will be very helpful for you to understand the design process so you are well informed and are able to make the right decisions.
After reading the guide you will understand;
• How the design process works.
• When you need to involve specialists.
• The order in which steps need to be taken
• How an architect works
• any lots more..
Give away nr.3 NEED AND OPTIONS REVIEW
This is actually the best one. For a small fee we will do a thorough assessment of your requirements and property conditions. After going through this process you will get:
• A comprehensive site review relating to orientation, topography, access, easements etc. will
be done so you know what options you have to build.
• Zoning issues will be looked and and addressed so there will be no issues later on.
• Your requirements will be discusses to see if they are within your budget and within council
• Discuss your possible ideas on site to see if they are feasible.
• Offer alternative solutions that may work even better if there are any. I will ask preffered consultants for advise on the project if needed. (All included in the price)
• Any much more valuable information.
• Peace of mind
Give away nr.4 BRIEFING YOUR ARCHITECT
This is the most essential document in the design process. After completing this template you will have a good understanding of:
This door really opens right up.
Sometimes I am lucky enough to get a client with a wild idea. I love them.
In this case they wanted a door that tilts right up and forms a roof over a verandah when open.
Yes sure, lets do it. 6 meters wide? Why not.....
And this is the result!
The House and landscaping is not yet finished.
The door is 6x2.4meters in size. 2 hydrolic rams fixed to a steel portal frame provide enough power to list the door safely. The door is operated by pushing a button on the inside of the room. The operator has a good view of the door when pressing the button so he can see any obstacles. The door stops when the button is released. each ram is fitted with a counterbalance valves to prevent runaway door closing.
The door is part of a100 sqm house extension we were involved in.
New websites are changing the way we live.
We are living is a time of huge changes and shifting boundaries.
You probably have heard of a website called “AirBnB" or another similar site?
These sites are revolutionizing the way we live and think about accommodation.
Public space has become more private and private space has become more public.
The needs and options for housing have changed dramatically. As house prices go up, more people are looking at options to gain extra income from their house by renting a room or part of the house using a website like AirBnB. The rental periods are very flexible and the rents paid are generally higher compared to a “normal” rental property. A great way to earn passive income without the need to go out and purchase a rental property. It is difficult to find a cash flow positive rental these days in most areas.
This offers many opportunities for homeowners as not only the financial gains can be used to pay of the mortgage but different rooms can be rented out at suitable times.
Or even when the children have left home, these rooms can be rented out during their absence. Home owners will also have more control over the renters as they will reside on the same property.
What does this mean for the way we design our houses?
The interesting part would be to design a spatial flexible house that allows for private space for the owners as a well as for the renters, but communal spaces can also be integrated eg. cooking facilities/laundry etc.
Part of the house could be separated with individual bathrooms and perhaps a separate entry?
Perhaps the rooms should be close to (semi)self containing? All within council regulations of course!
I believe there are lots of design options to help first homeowners to be able to afford a house and provide options for renters at the same time.
One shift I have already noticed is a removal from rental property from the market resulting in less rental properties on offer and making renting more expensive.
And of course the hotels, some are now offering medium term rentals for a competitive price to avoid having empty units.
Warm regards, Stephan Meijer
What is reverse brick veneer?
Traditional a brick veneer wall is placed on the exterior of the framing, fixed with anchors.
A reverse brick veneer wall is positioned on the interior side of the framing.
The outside walls can be finished with cladding, stucco or whatever you choose.
What are the benefits?
Timber framed houses are quick to heat but will lose the warmth very fast because of a lack of thermal mass in these houses. Thermal mass is a high density (heavy) building material that absorbs any surplus heat and releases it slowly so the house has few or little temperature swings. These houses tend to be comfortable.
By now placing a brick veneer wall on the inside of the insulated wall framing, the house will be much warmer and comfortable. The interior walls can be finished in many ways; plasterboard, stucco exposed brick etc. You can even use earth blocks on the inside!
On the outside you can choose any council approved wall finish as for any timber framed house.
If you are worried about the performance of brick walls in an earthquake; modern brick veneer walls have actually performed really well in the Christchurch earthquakes. Ref.Link below
Have you noticed how expensive it is to build in New Zealand while the quality is often lacking.? For starters and people with low / average incomes, it is almost impossible to build a new home. And that while there is still plenty of land available.
WHAT I DO
Whether you have a large budget and you want something unique to live / work or you want an affordable shelter, I am able to surpass your expectations due to my innovative and original ideas.I am an expert in designing houses on steep hills and sloping sites.
THIS IS WHAT I CAN DO FOR YOU.
Clients often come to me asking if I can design an affordable home for them because they can not find a suitable design from one of the housing companies.
I have proven that it is possible to design an individual home that meets all the requirements of the customer for the same or a lower price compared to a standard home over and over again.
If you have a larger budget, feel free to contact me. I can help you getting value for money and I really enjoy designing awesome houses / buildings using innovative solutions and the latest technological developments that may or may not be available yet in New Zealand.
Or sometimes we even invent new solutions if they are not available!
WHY CHOOSE ME?
Due to my European background, I am able to design technically sophisticated, modern buildings and houses. I am an expert in providing difficult or new solutions to achieve the highest value for money in many situations.
It is common in Europe to engage an architect for the design of homes for people with smaller budgets. Clients in NZ often think engaging an registered architect will be out of their budget.
You may be surprised to find out about our low fees for small budgets.
Architect fees can further be reduced by eg. early involvement of external parties in the design process and by you doing the leg work. I have proven time and again that I am able to design a unique, quirky home that is affordable and user-friendly.